Your Favorites
10 oz/300 mL (EA) Edit
N/A Edit
LIQUID NAILS® Paneling Wood & Foam Molding Adhesive (LN-606) is specially designed for projects like paneling and molding where instant hold is needed. The fast, sure hold of this construction adhesive provides precision placement and minimizes nailing. Twenty minute open time and an impact-resistant bond. This product is certified by UL Environment to meet the GREENGUARD Gold Standard as a low emitting material.
Sizes:
10 oz. Cartridge
Coverage:
30 Lineal ft. Using 1/4" Bead
Specifications:
ASTM C-557
All panels must be separated and conditioned to room temperature for 48 hours prior to installation. Surfaces must be clean, dry and structurally sound. Cut and pre-fit materials prior to installation. Place Cartridge in gun, cut nozzle, and puncture inner seal with nail or wire. Apply a ¼” bead of adhesive around the perimeter of parts to be bonded. Adhere materials within 20 minutes of gunning adhesive. Warped materials may require bracing and/or nailing.
INSTANT-GRAB METHOD:
Paneling: Apply 1/4” bead of adhesive approximately 1” from edge of panel around the perimeter. Apply two zigzag 1/4” beads in the middle of the panel. Press panel firmly into place. Remove panel from wall for one minute. Rejoin panel to wall.
Molding: Apply 1/4” zigzag bead to back of molding. Press molding firmly into place. Starting at one end, nail every 12".
Looking for a datasheet? Access PPG's full datasheet portal here or visit https://products.ppgac.com/
As a member of our community, you’ll be first to get our special offers, all the details on our latest products, and of course, oodles of inspiring ideas!
