Paneling & Molding Adhesive

Application Instructions: 

All panels must be separated and conditioned to room temperature for 48 hours prior to installation. Surfaces must be clean, dry and structurally sound. Cut and pre-fit materials prior to installation. Place Cartridge in gun, cut nozzle, and puncture inner seal with nail or wire. Apply a ¼” bead of adhesive around the perimeter of parts to be bonded. Adhere materials within 20 minutes of gunning adhesive. Warped materials may require bracing and/or nailing.

INSTANT-GRAB METHOD:

Paneling: Apply 1/4” bead of adhesive approximately 1” from edge of panel around the perimeter. Apply two zigzag 1/4” beads in the middle of the panel. Press panel firmly into place. Remove panel from wall for one minute. Rejoin panel to wall.

Molding: Apply 1/4” zigzag bead to back of molding. Press molding firmly into place. Starting at one end, nail every 12".