Mirror Adhesive

Application Instructions: 

Insert tube into caulking gun, cut nozzle and puncture inner seal. Apply adhesive to mirror back in 2 to 3 inch diameter globs, at least 1/2" thick, per every sq.ft. of mirror. Press into place within 10 minutes. The adhesive should be approximately 1/16" to 1/8" in thickness after mirror installation. Do not remove mirror once in place. A support system such as permanent J channels or L hangers should be used for heavier mirrors and mirrors thicker than 1/8". Otherwise use pins which can be removed after adhesive has set up. Mirror adhesive will cure to 60% strength in 48 hours at normal room temperature. Full cure depends on temperature, humidity and amount of air that can reach the adhesive. Do not seal edges.