Landscape Block Adhesive (Low-VOC)

Application Instructions: 

Insert cartridge into caulking gun. Cut the tip on the nozzle at a 45° angle for a desired bead size of 1/4" or 1/2". Puncture seal inside the nozzle where the nozzle meets the cartridge with a long nail or wire. Apply the adhesive to the block on which the next course or capstones will be glued. The adhesive should be applied in a bead 1/2" from edge along the front and along the back of the block. Install the capstones or block within ten minutes after the adhesive has been applied.

Note: Do not allow traffic on stairs or use of walls for 24 hours after the adhesive application. Do not apply to wet surfaces.