LIQUID NAILS® Drywall Advanced construction adhesive, DWP-40, features Nail Pop Minimizing Technology
that reduces nail pops by up to 90%* and is specially formulated for interior drywall
installation and correcting minor framing irregularities. Reduces fastener use up to
50%, grabs fast, bonds strong, and buffers sound. Certified by UL Environment to
meet the GREENGUARD Gold Standard as a low emitting material.
*Compared to traditional latex drywall adhesives when finished after
24 hours at room temperature.
28 oz. Cartridge
88 Lineal ft. Using 1/4" Bead
ASTM C-557
LIQUID NAILS® Drywall Advanced construction adhesive, DWP-40, features Nail Pop Minimizing Technology
that reduces nail pops by up to 90%* and is specially formulated for interior drywall
installation and correcting minor framing irregularities. Reduces fastener use up to
50%, grabs fast, bonds strong, and buffers sound. Certified by UL Environment to
meet the GREENGUARD Gold Standard as a low emitting material.
*Compared to traditional latex drywall adhesives when finished after
24 hours at room temperature.
28 oz. Cartridge
88 Lineal ft. Using 1/4" Bead
ASTM C-557
Cut and prefit materials prior to installation. Cut nozzle to desired bead size marked on nozzle. Puncture inner seal with nail or wire. Important: For best results, set drywall onto adhesive within 15 minutes of application.
Walls: Apply a 1/4" adhesive bead directly onto studs and plates. Press drywall firmly against adhesive; adjust as necessary. Holding drywall’s outer edges, nail every 12" on outer edges and every 16" over studs in field of the panel. Fasten center of field with nails every 16" over studs.
Note: If studding is perfectly true, nailing inside field will not be required.
Ceilings: Apply a 1/4" adhesive bead to rafters. Fasten drywall’s outer edges with nails, 12" on center. Fasten center of field with a nail at each rafter.