Mirror Adhesive (low-VOC) (LN-730)

Key Features

• Will not desilver mirrors
• Permanent bond
• Heat and steam resistant
• Stays flexible
• VOC Compliant
• Non-flammable
• Contributes to LEED^® certification
• Contributes toward NAHB National Green Building Standard™ certification of the structure

Recommended For:

bonding mirrors to concrete, drywall, plaster (primed or sealed), painted surfaces, wood and metal in conjunction with a permanent mechanical fastening system. Do not use this product without a permanent mechanical support system.

NOT Recommended For:

exterior use or uses other than mirror installations. Not recommended for applying mirrors to wallpapered surfaces, foamboard or treated wood. Not recommended for use without a permanent mechanical support system. Not recommended for ceiling installations.

Available Sizes

• 10 fl. oz. cartridge
• 4 fl. oz. squeeze tube

Coverage

• 10 fl. oz. cartridge covers 7 sq. ft.
• 4 fl. oz. squeeze tube covers 2 sq. ft.

Max VOC

46 GPL

• Download MSDS Sheets
• Download Technical Data Sheets

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

 

Surface Preparation

Surfaces must be clean, dry, free from dust, dirt, grease and structurally sound. When used on porous substrates such as unpainted plaster, drywall and concrete, the surface must be sealed with a high-quality primer. If surface has been painted, it should be scratched with coarse sandpaper before adhesive is applied. On non-porous substrates such as glass, tile or metal, bond coating is not necessary.

Product Application

Cut and pre-fit materials prior to installation. Cut nozzle to desired size (marked on nozzle). Puncture inner seal with nail or wire. Install permanent mechanical fastening system prior to application of adhesive. Apply adhesive in 3/8" diameter beads running the full length of the mirror. Beads should be 5 to 6 inches apart. Hang mirror on fastening system and press into place against wall within 15 minutes after adhesive application. Tape or brace top of mirror to hold in place if necessary, depending on support system used. Adhesive will set in approximately 24 hours. Edges of mirror may be sealed immediately after application, if desired.

Drying Time

Adhesive will set in approximately 24 hours.

Cleanup

Use mineral spirits on wet adhesive. Dried adhesive may be removed by scraping.

Buy Online

Visit these online retailers for a selection of Liquid Nails products.

Price and item availability may vary.

	homedepot.com
	lowes.com