Drywall Adhesive (DWP-24)

Key Features

• Fast grab for easy installation
• Moisture proof
• Minimizes nail popping
• Reduces sound transmission
• Contributes to LEED^® certification
• GREENGUARD Children & Schools^SM Certification
• Contributes toward NAHB National Green Building Standard™ certification of the structure

Recommended For:

bonding drywall to wood, studding, rafters, galvanized steel, ceiling systems, aluminum, drywall, other surfaces and foamboard.

NOT Recommended For:

exterior wall construction.

Available Sizes

• 28 fl. oz. (828 ml) cartridge

Coverage

• Using a 1/4" (.64 cm) bead: 28 fl. oz. (828 ml) cartridge covers 88 lineal ft.

Max VOC

32 GPL

• Download MSDS Sheets
• Download Technical Data Sheets

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

 

Surface Preparation

Surfaces must be clean, dry and structurally sound.

Product Application

Cut and prefit materials prior to installation. Cut nozzle to desired bead size marked on nozzle. Puncture inner seal with nail or wire. Important — For best results, set drywall onto adhesive within 15 minutes of application.

Walls

Apply a 1/4" adhesive bead directly onto studs and plates. Press drywall firmly against adhesive and adjust as necessary. Holding drywall's outer edges, nail every 16" and, as necessary, inside the field. Note — If studding is perfectly true, nailing inside field will not be required.

Ceilings

Apply 1/4" adhesive bead to rafters. Fasten drywall's outer edges with nails, 12" on center. Fasten center of field with a nail at each rafter. Drywall larger than 4' x 8' should be fastened with 2 nails in the field of each rafter.

Laminating

Apply a 1/4" adhesive bead to structure. Some uses: bonding drywall to drywall and drywall to expanded insulation panels.

Cleanup

Use water.