Projects Construction Adhesive (LN-601)

Key Features

• Bonds common building materials
• Stays flexible
• Durable bond
• America's #1 brand
• Original formula

Recommended For:

bonding all common building materials, including plywood, hardboard, furring strips, paneling, ceramic fixtures, drywall, molding and corkboard.

NOT Recommended For:

application of wood flooring, subfloors, underlayment, mirrors, ceiling tiles, 1/8" MDF paneling, natural or synthetic marble and granite.

Available Sizes

• 28 fl. oz. (828 ml) cartridge
• 10 fl. oz. (296 ml) cartridge

Coverage

• 28 fl. oz. (828 ml) cartridge covers 88 lineal ft.
• Using a 1/4" (.64 cm) bead: 10 fl. oz. (296 ml) cartridge covers 32 lineal ft.

Max VOC

400 GPL

• Download MSDS Sheets
• Download Technical Data Sheets

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

 

Surface Preparation

Make sure that all surfaces are clean, dry and structurally sound before product is applied.

Product Application

Cut and prefit materials prior to installation. Insert Liquid Nails® cartridge into standard caulking gun. Cut nozzle to desired bead size marked on nozzle. Puncture inner seal with nail or wire.

Bonding Paneling to Furring Strips or Studs

Apply a zig-zag 1/4" (.64 cm) bead of adhesive to each strip or stud to be covered by material. Position paneling so edges meet at center of stud. Only severely warped materials will require finishing nails at top and bottom.

Bonding Panels, Corkboard, etc. to Flat Surfaces

Apply 1/4" (.64 cm) beads of adhesive a maximum of 12" (30 cm) apart, within 1-1/2" (3 cm) of all edges and at outside edges.

Venting Method

Press materials firmly into place. Pull away for 3 to 5 minutes, then press back into place.

Cleanup

Use mineral spirits.