Paneling & Molding Adhesive (LN-910)

Key Features

• Retains precise placement
• Reduces nailing
• Impact resistant
• Instant grab for easier installation

Recommended For:

paneling, molding and trim and furring strips.

NOT Recommended For:

outdoor use or uses other than paneling and molding installations. Not recommended for plastic molding and trim or 1/8" thick medium density fiberboard (MDF) paneling.

Available Sizes

• 10 fl. oz. (296 ml) cartridge

Coverage

• Using a 1/4" (.64 cm) bead: 10 fl. oz. (296 ml) cartridge covers 32 lineal ft.

Max VOC

376 GPL

• Download MSDS Sheets
• Download Technical Data Sheets

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

 

Surface Preparation

Make sure that all surfaces are clean, dry and structurally sound before product is applied.

Product Application

Cut and prefit materials prior to installation. Insert tube into standard caulking gun. Cut nozzle at 45° angle to desired bead size marked on nozzle. Puncture inner seal with nail or wire.

Instant Grab Method for Paneling

Apply a 1/4" zig-zag bead of adhesive to each material that panel will be covering. Position panels so that edges meet at stud center. Press materials firmly into place, pull away for 1 to 3 minutes, then press back into place.

Instant Grab Method for Molding

Apply a 1/4" zig-zag bead of adhesive down center of molding strip. Press firmly into place, lift off for 1 to 3 minutes, then press back into place.

Drying Time

Working time up to 10 minutes. Dries in 24 hours. Fully cured in 7 days.

Cleanup

Use mineral spirits.