Mirror Adhesive (LN-930)
This adhesive will not desilver mirrors. Ten minutes working time allows for precision placement on most surfaces, and the flexible bond will not become brittle with age. This adhesive must be used with a permanent mechanical support system, such as a shelf angle or "J" channel.
Key Features
- Will not desilver mirrors
- Permanent bond
- Heat and steam resistant
- Stays flexible
- Contributes to LEED® certification
Recommended For:
bonding mirrors to concrete, drywall, plaster (primed or sealed), painted surfaces, wood and metal.
NOT Recommended For:
exterior use or uses other than mirror installations and applying to wallpapered surfaces, foamboard or treated wood.
Available Sizes
- 10 fl. oz. (296 ml) cartridge
- 4 fl. oz. (118 ml) squeeze tube
Coverage
- 10 fl. oz. (296 ml) cartridge covers 6 sq. ft.
- 4 fl. oz. (118 ml) squeeze tube covers 2 sq. ft.
Max VOC
199 GPL
Surface Preparation
Surfaces must be clean, dry, free from dust, dirt, grease and structurally sound. When used on porous substrates such as unpainted plaster, drywall and concrete, the surface must be sealed with a high-quality primer. If surface has been painted, it should be scratched with coarse sandpaper before adhesive is applied. On non-porous substrates such as glass, tile or metal, bond coating is not necessary.
Product Application
Cut and pre-fit materials prior to installation. Cut nozzle to desired size (marked on nozzle). Puncture inner seal with nail or wire. For best results, apply adhesive to back of mirror in globs 2 to 3 inches (5 to 7.6 cm) in diameter for every square foot of mirror. Press mirror firmly into place, ensuring good contact with substrate, within 10 minutes of application. Do not remove mirror once in place. A support system such as permanent J channels or L hangers must be used. Mirror adhesive will cure to 60% strength in 48 hours at normal room temperature. Full cure will depend on temperature, humidity and amount of air that can reach adhesive. Do not seal mirror edges until adhesive is fully cured.
Drying Time
dries to 60% strength in 24 hours. Fully cured in one week.
Cleanup
Use mineral spirits.
Caulks, Sealants & Weatherproofing
- (AC-138)
- (DR-807)
- (CS-144)
- (CS-145)
- (CR-805)
- (LRS-280)
- (LS-510)
- (LC-135)
- (RR-808)
- (LS-205)
- (LS-205)
- (TC-10)
- (LC-130)
- (LC-130)
- (LC-130)
- (LC-130)
- (GC-17)
Builders Choice™ Construction Products
- (BC-150)
- (BC-100)
- (BC-290)
- (BC-729)
- (BC-490)
- (BC-749)
Construction Adhesives
- (M-321)
- (LN-975)
- (CAP-95)
- (CB-10)
- (DWP-24)
- (FRP-300)
- (FRP-310)
- (LN-901)
- (LN-903)
- (LN-704)
- (LN-905)
- (LN-933)
- (LN-930)
- (LN-730)
- (AWP-40)
- (LN-606)
- (LN-910)
- (LN-710)
- (LN-950)
- (LN-603)
- (LN-604)
- (LN-601)
- (LN-701)
- (LN-602)
- (LN-902)
- (LN-915)
- (LN-715)
- (LN-990)
- (LN-940)
- (LN-740)
Household Adhesives
- (LN-204)
- (LN-207)
- (LN-365)
- (LN-201)
- (LN-203)
- (LN-202)
- (LN-600)
- (LN-700)
- (LN-206)
Need A Hand?
Adhesive Calculator
Determine how much adhesive — and other material — you need for your project.
Household Adhesive Selector
Find the best LIQUID NAILS adhesive for home projects and small repairs.
Green Building Tools
Check out our selection of earth-friendly, low-VOC LIQUID NAILS adhesives.