Heavy Duty Construction Adhesive (low-VOC) (LN-903)

Key Features

• Exceptional holding power
• Excellent gap filling
• VOC compliant
• 20 minute open time
• Contributes to LEED^® certification
• Contributes toward NAHB National Green Building Standard™ certification of the structure

Recommended For:

exterior/interior use on brick veneer, fiberwood, wood trim, particleboard, drywall, plywood, concrete backerboard, polystyrene foam, ceiling tiles, imitation stone.

NOT Recommended For:

flooring applications, plastics, ceramics, mirrors, granite, marble or installing tileboard directly to studding.

Available Sizes

• 28 fl. oz. (828 ml) cartridge
• 10 fl. oz. (296 ml) cartridge
• 1 Gallon can
• 1 Quart can

Coverage

• Using a 1/4" (.64 cm) bead: 28 fl. oz. (828 ml) cartridge covers 88 lineal ft.
• Using a 1/4" (.64 cm) bead: 10 fl. oz. (296 ml) cartridge covers 30 lineal ft.
• 1 Gallon can covers 60 to 90 sq. ft.
• 1 Quart can covers 15 to 22 sq. ft.

Max VOC

70 GPL

Specifications

ASTM C-557

• Download MSDS Sheets
• Download Technical Data Sheets

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

 

Surface Preparation

For best results, adhesive and both surfaces should be above 60°F. All substrates must be structurally sound and free from grease, dust, dirt and flaking coatings. New plaster must be fully cured.

Application Prep

Cut nozzle at a 45° angle to desired size. Puncture inner seal with nail or wire.

Walls

Apply 1/4" adhesive bead directly onto studs and plates. Press drywall firmly against adhesive. Adjust as necessary. Holding drywall's outer edges, nail every 16" and inside the field as necessary. Note: If studding is perfectly true, nailing inside field will not be required.

Ceilings

Apply 1/4" adhesive bead to rafters. Fasten drywall's outer edges with nails 12" on center. Fasten center of field with a nail at each rafter. Drywall larger than 4' x 8' should be fastened with 2 nails in the field of each rafter.

Laminating

Apply 1/4" adhesive bead to structure. Some uses include drywall to drywall and drywall to block walls.

Drying Time

Working time: Up to 20 minutes. Very warm temperatures will decrease working time. If adhesive becomes dry, scrape it off and reapply.

Cleanup

Use mineral spirits. Wet adhesive may be removed with soap and water.

Buy Online

Visit these online retailers for a selection of Liquid Nails products.

Price and item availability may vary.

	amazon.com
	lowes.com
	homedepot.com