Projects & Foamboard Adhesive (LN-604)

Key Features

• Will not attack foam insulation
• VOC compliant
• No harmful fumes
• High-strength bond
• Water cleanup
• Contributes to LEED^® certification
• GREENGUARD Children & Schools^SM Certification
• Contributes toward NAHB National Green Building Standard™ certification of the structure

Recommended For:

foamboard, drywall, molding, paneling, plywood/hardboard, masonry/concrete, foamback tub surrounds, corkboard, ceramic tile repair, furring strips, and 1/8" thick medium-density fiberboard (MDF) paneling.

NOT Recommended For:

outdoor use or for application of mirrors, marble, ceiling tile, wood flooring, underwater use, or most tub surrounds (with the exception of foamback tub surrounds). Not recommended for bonding foamback tub surrounds directly to ceramic tile.

Available Sizes

• 10.3 fl. oz. cartridge

Coverage

• Using a 1/4" (.64 cm) bead: 10.3 fl. oz. cartridge covers 32 lineal ft.

Max VOC

35 GPL

• Download MSDS Sheets
• Download Technical Data Sheets

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

 

Surface Preparation

Make sure that all surfaces are clean, dry and structurally sound before product is applied. Do not apply to moist concrete or masonry. Note: One surface must be porous.

Product Application

Cut and prefit materials prior to installation. Insert tube into caulking gun. Cut nozzle to desired bead size marked on nozzle. Puncture inner seal with nail or wire. Adhesive should be gunned at a room temperature of 60°F or higher. Adhere all materials before adhesive skins over.

Bonding Material To Furring Strips Or Studs

Apply a zig-zag 1/4" bead of adhesive to each strip or stud to be covered by material. Position materials so edges meet at stud center. Press firmly into place. Finishing nails are required.

Bonding Foamboard, Foamback Tub Surrounds, Panels, Corkboard, etc. To Flat Surfaces

Apply 1/4" beads of adhesive over entire substrate in vertical zig-zag pattern. Beads should be a maximum of 12" apart and within 1-1/2" of all edges. Bracing may be necessary until adhesive has set.

Drying Time

Working time up to 30 minutes. Dries in 24 hours. Fully cured in 28 days.

Cleanup

If adhesive is still fresh, use water cleanup. If adhesive has dried, use mineral spirits.

Buy Online

Visit these online retailers for a selection of Liquid Nails products.

Price and item availability may vary.

	homedepot.com
	lowes.com