Fiberglass Reinforced Plastic Panel Adhesive (low-VOC) (FRP-310)

Key Features

• VOC-compliant
• Strong bond
• Easy water cleanup
• Will not attack foam insulation
• Contributes to LEED^® certification
• Contributes toward NAHB National Green Building Standard™ certification of the structure

Recommended For:

bonding FRP to cured concrete, wood, drywall, concrete backerboard, greenboard, foamboard and NRP panels (non-reinforced).

NOT Recommended For:

exterior use or for bonding to painted surfaces or wallpaper. May stain marble or granite surfaces.

Available Sizes

• 3.5 Gal. can
• 1 Gal. can
• 1 Quart can

Coverage

• 3.5 Gal. can covers 175 sq. ft.
• 1 Gal. can covers 50 sq. ft.
• 1 Quart can covers 12 sq. ft.

Max VOC

28 GPL

Specifications

ASTM C-557

• Download MSDS Sheets
• Download Technical Data Sheets

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

 

Surface Preparation

For best results, adhesive and substrates should be between 50° and 90°F. Surfaces must be structurally sound and dry, free of grease, dirt, dust, wallpaper, paint or anything that would interfere with a bond. Level any high spots and fill all cracks and holes with appropriate fillers.

Product Application

Cut and pre-fit FRP panels. Spread adhesive with the recommended trowel over the entire back of the FRP panel. As soon as adhesive is spread over entire panel and before adhesive skins over (within 45 minutes), set panel in position and press against wall. Press panel firmly into place, working from the center to the edges until full contact has been made. Bracing may be required if walls or panels are not completely straight.

For Application Over Concrete

Concrete surfaces need to be dry and completely cured. When installing FRP panels over below-grade concrete where moisture can penetrate, you must first attach furring strips to the concrete block and then attach a solid surface, such as wood or drywall, to those furring strips. Then continue with standard FRP application.

For Channel Moldings, Permanent Fasteners and Panel Spacings

Follow FRP panel manufacturer's specifications.

Drying Time

Working time up to forty-five minutes. Very warm, dry conditions will decrease working time. Full cure within one week.

Cleanup

Wet FRP-310 adhesive can be removed with water. After adhesive has dried, use mineral spirits. Note warnings on mineral spirits container.

Buy Online

Visit these online retailers for a selection of Liquid Nails products.

Price and item availability may vary.

	homedepot.com
	lowes.com