Multi-Purpose Construction Adhesive (BC-290)

Key Features

• Quick initial grab
• Up to 15 minutes working time
• Fills gaps up to 3/8"
• Freeze-thaw stable
• Contributes to LEED^® certification
• GREENGUARD Children & Schools^SM Certification
• Contributes toward NAHB National Green Building Standard™ certification of the structure

Recommended For:

bonding prefinished panels, molding and trim, furring strips, foilboard, plywood, hardboard, drywall, polystyrene foam insulation and more to wood, steel, plaster, concrete, masonry, metal and most other common building materials.

NOT Recommended For:

exterior use or use with marble or granite.

Available Sizes

• 28 fl. oz. (828 ml) cartridge
• 10 fl. oz. (296 ml) cartridge

Coverage

• 28 fl. oz. (828 ml) cartridge covers 88 lineal ft.
• Using a 1/4" (.64 cm) bead: 10 fl. oz. (296 ml) cartridge covers 32 lineal ft.

Max VOC

35 GPL

• Download MSDS Sheets
• Download Technical Data Sheets

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

 

Surface Preparation

Surfaces must be clean, dry and structurally sound.

Panel And Drywall Application

Apply a 1/4" (.64cm) continuous bead of adhesive to all studs, plates or furring strips to be contacted by the panel. When bonding panels to existing walls, apply continuous beads of adhesive 12" (30cm) apart to back of each panel. Push panels firmly into place and adjust. Panels should be in position within 15 minutes of adhesive application. Panels may require two finishing nails at top and bottom in areas that will be covered by molding. After panel is in place, tap lightly with a padded block and hammer to ensure complete contact.

Cleanup

Use water for wet adhesive.