Polyurethane Adhesive (Low VOC)

Area Preparation:

Wear gloves when using this product.

Application: Insert cartridge into a standard caulk gun and puncture inner seal with a nail or wire. Apply a 1/4 inch wide bead of adhesive to one of the surfaces to be bonded. Join the surfaces together within 30 minutes and press firmly so that the adhesive is 1/16" to 1/8" in thickness. Use mechanical fasteners or bracing to hold surfaces together until the adhesive has set (about 8 to 12 hours, depending on temperature, humidity, and porosity of the surfaces). Do not use this product at temperatures below 40˚ F. Clean up wet adhesive with mineral spirits or toluene. Remove dry adhesive by scraping.

Dry Time: Product will normally dry within 8-12 hours. Actual dry time may vary with temperature, humidity and materials used.