Interior Projects Construction Adhesive

Area Preparation:

Insert LIQUID NAILS^® cartridge into standard caulking gun. Cut nozzle at 45° angle to desired bead size marked on nozzle. Puncture inner seal with nail or wire.

Bonding Paneling to Furring Strips or Studs: Apply a zigzag 1/4" (.64 cm) bead of adhesive to each strip or stud to be covered by material. Position paneling so edges meet at stud center. Only severely warped materials will require finishing nails at top and bottom.

Bonding Panels, Corkboard, etc. to Flat Surfaces: Apply 1/4" (.64 cm) zigzag vertical adhesive bead a maximum of 12" (30 cm) apart, within 1-1/2" (3 cm) of all edges.

Quick-Bond Method: Press materials firmly into place and pull away for 3 to 5 minutes, then press back into place.