Skip to Content

Your Favorites

  • LIQUID NAILS<sup>®</sup> FRP Fiberglass Reinforced Plastic Panel Interior Construction Adhesive

LIQUID NAILS® FRP Fiberglass Reinforced Plastic Panel Interior Construction Adhesive

View Data Sheets
Size

3 Gallons/11.3 L (03), Gallon/3.78 L (01)

Find a Store
Pro opening paint can

Product Details

LIQUID NAILS® FRP Fiberglass Reinforced Plastic Panel Adhesive (FRP-310) is a strong-bonding, low-odor, low-solvent, high-strength adhesive for interior applications. It features excellent adhesion and low VOC-content.

Sizes:

1 Gallon
3.5 Gallon

Coverage:

50 Sq. Ft Per Gallon

Specifications:

ASTM C-557

Features:

  • Will not attack foam insulation
  • Will not burn through panels
  • Trowel grade adhesive
  • Strong bonding

Application Details

  1. Cut and pre-fit panels.
  2. Spread adhesive with the recommended trowel over entire back of the panel.
  3. As soon as adhesive is spread over entire panel and before adhesive skins over (within 45 minutes), set panel in position and press against wall.
  4. Press panel firmly into place, working from the center to the edges until full contact has been made.
  5. Bracing may be required if walls or panels are not completely straight.
  6. For channel moldings, permanent fasteners, and panel spacings, follow panel manufacturer’s specifications.
  7. For application over concrete: Concrete surfaces must be dry and completely cured. When installing panels over below-grade concrete, where moisture can penetrate, you must first attach furring strips to the concrete block and then attach a solid surface, such as wood or drywall, to those furring strips. Then continue with standard application.

Working time: Up to 45 minutes. Very warm, dry conditions decreases working time.

Looking for a datasheet? Access PPG's full datasheet portal here or visit https://products.ppgac.com/

Code Sizes Download
5167210 3 Gallons/11.3 L (03)
FRP-310 Gallon/3.78 L (01)