=
 
 
 

Heavy Duty Construction Adhesive - Trowelable (LNP-903)

This heavy duty, non-solvent and high-strength trowelable construction adhesive is specially formulated to provide the professional and do-it-yourselfer excellent adhesion and longer working time.

 

Trowelable LNP-903

Key Features

  • Exceptional holding power
  • Excellent gap filling
  • Bonds a wide range of construction materials
  • Strong Initial Tack
  • Waterproof, weatherproof bond will outlast project

Recommended For:

many exterior and interior heavy duty applications including foamboard, corkboard, greenboard, plywood, fiberglass, imitation stone, particleboard, tileboard, wood trim, brick veneer, polystyrene foam, ceiling tile, cement backerboard, drywall/gypsum

NOT Recommended For:

installing tileboard directly to studding, granite & marble, sheet goods, ceramic tile, underlayment, flooring applications, mirrors, carpet

Available Sizes

  • 1 gallon can
  • 1 quart can

Coverage

  • Coverage on rough or textured surfaces may be less.: 1 gallon can covers 50 to 75 sq. ft.
  • Coverage on rough or textured surfaces may be less.: 1 quart can covers 12 to 18 sq. ft.

Max VOC

43 GPL

 

Get Adobe Reader to view certain LIQUID NAILS Adhesive product info

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

Surface Preparation

For best results, adhesive and substrates should be above 60°F. All substrates must be structurally sound and free from grease, dust, dirt and flaking coatings. New plaster must be fully cured. All paneling must be conditioned for a minimum of 24 hours before adhesive installation.

Tileboard

For a waterproof bond, trowel a thin skim coat (using smooth side of trowel) of adhesive over the wall surface to 1/2" from each edge. With panel face down, spread adhesive over entire back surface with recommended trowel. Allow adhesive to become tacky by waiting ten minutes. Firmly press panel to wall making sure full contact has been made. As a precaution, edge bracing is advisable to overcome possible curling of the panel.

Other Substrates

Apply adhesive to the base substrate using the recommended trowel. Allow ten minutes for the adhesive to become tacky. Press substrate firmly in place to assure good contact. Severely warped substrates will require bracing until the adhesive sets.

Visit these online retailers for a selection of LIQUID NAILS construction adhesive products.

Price and item availability may vary.

 
 

Learn more about the uses and advantages of LIQUID NAILS Heavy Duty Construction Adhesive.

View Video View Video
 
 
;