Tub Surround & Shower Walls Adhesive (LN-915)

This unique construction adhesive by LIQUID NAILS Adhesive is specially formulated for exceptional waterproof adhesion under extreme conditions. It won't harm most tub surrounds and shower walls, the light color won't show through most surrounds, and it requires only a 1/8" bead.

 

Tub Surround & Shower Wall Construction Adhesive

Key Features

  • Safe for most fiberglass and plastic units
  • Low odor — ideal for use in occupied areas
  • Excellent water resistance
  • Heat and steam resistant

Recommended For:

bonding most plastic, fiberglass and foam-back tub and shower surrounds to structurally sound drywall, cement backerboard, ceramic tile, plywood and greenboard. This construction adhesive is also recommended for polystyrene foam-back tub kits (except over ceramic tile) when applied with adhesive venting method.

NOT Recommended For:

flooring applications, ceramics, mirrors, granite. This specialized construction adhesive is also not recommended for application of polystyrene foamback tub kits over ceramic tile, and uses other than those listed above.

Available Sizes

  • 10 fl. oz. cartridge

Coverage

  • Using a 1/8" (2mm) bead: 10 fl. oz. cartridge covers 120 lineal ft.

Max VOC

323 GPL

 

Get Adobe Reader to view certain LIQUID NAILS Adhesive product info

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

Surface Preparation

Make sure that all surfaces are clean, dry, structurally sound and free of any loose paint or other materials. Sand and roughen high-gloss paint.

Product Application

Do not apply LN-915 when surface or adhesive temperature exceeds 90°F. Cut nozzle at 45° angle to a 1/8" bead size. Puncture inner seal with nail or wire. Apply in a continuous 1/8" bead, following the tub surround manufacturer's instructions. Some tub surround manufacturers require adhesive bead to be spread out with a trowel. Consult tub surround installation instructions for specific recommendations.

Venting Method

Apply LN-915 adhesive and press panel firmly to wall, then pull away. Wait 3 to 5 minutes, then press panel firmly back into place. For proper adhesion, after 20 to 30 minutes, go around entire tub surround and press firmly over all flat surfaces. If any edges lift up, tape them to the wall with masking tape until adhesive dries. Let cure 24 hours.

Cleanup

Use mineral spirits. Do not use turpentine.

Visit these online retailers for a selection of LIQUID NAILS construction adhesive products.

Price and item availability may vary.