Perfect Glue (PG-00)

Key Features

• Withstands temperatures from -60° to 300°F
• Acid free / Low odor
• Flexible & shock absorbing
• Works on wet surfaces
• Indoor & outdoor
• Patented technology
• Can fill gaps up to 1/4" (6mm)
• Contributes to LEED^® certification
• GREENGUARD Children & Schools^SM Certification
• Contributes toward NAHB National Green Building Standard™ certification of the structure

Recommended For:

fabric, wood, metal, leather, ceramic, foam, rubber, canvas, stone, cardboard, brick, marble, concrete, plastics. Will not bond polyethylene or polypropylene.

NOT Recommended For:

sheet goods, wood flooring, aquariums or other underwater applications.

Available Sizes

• 0.75 fl. oz. squeeze tube

Coverage

• 0.75 fl. oz. squeeze tube covers 9 lineal ft.

Max VOC

52 GPL

• Download MSDS Sheets
• Download Technical Data Sheets

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

 

Surface Preparation

Surfaces must be clean and free from any loose matter. Surfaces may be damp. Apply Perfect Glue to one surface. Note: For faster bonding, dampen surfaces lightly with water before applying adhesive.

General Application

Press surfaces together within 5 minutes after applying adhesive. For better tackiness, pull surfaces back apart for 3-5 minutes, then rejoin. Surfaces may be adjusted for 10 minutes after joining. Adhesive will reach initial cure in one hour and full cure in 6-8 hours.

Sealing A Tear

If ends cannot be overlapped, then lay ends as close together as possible. Lay a bead of glue over entire tear and a little past each end. Smooth bead so that it forms a thin film on both sides of tear. Wipe away excess with a dry cloth.

Bonding Pieces End-to-End

Find a suitable piece to use as a "splint" to reinforce the repaired joint. Apply glue to the splint over the area that will be in contact with the repaired piece. Apply glue to both ends of joint. Join all pieces together as desired and brace or clamp.

Plastics, Metals, and Non-Porous Surfaces

Plastics, metals, and non-porous surfaces that can be bonded with Perfect Glue include aluminum, steel, brass, PVC, fiberglass, rubber, neoprene, nylon, ABS, and polystyrene. Perfect Glue cannot be used to bond polyethylene or polypropylene. Apply a bead of glue to one of the surfaces to be bonded. Spread the bead to cover the surface to be bonded. Join the surfaces together, then pull them apart and let stand for 5 minutes before pressing back together. For a quicker bond, mist the surfaces lightly with water before rejoining. Allow 1 hour before light use and 8 hours before normal use.

Cleanup

Uncured adhesive may be removed by wiping with a clean cloth. Dried adhesive may be removed by scraping.

Buy Online

Visit these online retailers for a selection of Liquid Nails products.

Price and item availability may vary.

	homedepot.com
	lowes.com