Extreme Heavy Duty (LN-907)

Extreme Heavy Duty Construction Adhesive is an interior/exterior grade, low-solvent, high-strength construction adhesive designed to provide outstanding adhesion and durability in bonded assemblies. The extreme formula touts the ability to perform in extreme conditions, bonding in temperatures from 22⁰ F to 120⁰ F. This enables professional contractors and avid DIY-ers to work in the extreme heat or cold and get their job done regardless of the weather.

 

construction adhesive

BUY NOW

Key Features

  • Bonds in extreme temperatures (22⁰ F to 120⁰ F)
  • 200% stronger than fasteners alone
  • Low solvent, high-strength formula
  • Outstanding adhesion and durability
  • All-season performance, no down time

Recommended For:

many exterior and interior heavy duty applications including Plywood, Waferboard, Cementboard, Particleboard, Treated Lumber, Drywall, Brick Veneers (Interior Only), Imitation Stone (Interior Only), Tileboard, Foamboard, Ceiling Tiles and most common building materials (concrete, lumber, etc.).

NOT Recommended For:

Plastics, vinyl, ceramics, mirrors, granite, marble installing tileboard directly to studding, and wood or laminate flooring.

Available Sizes

  • 10 fl. oz. cartridge

Coverage

  • Using a 1/4" (.64 cm) bead: 10 fl. oz. cartridge covers 30 linear ft.

Max VOC

18 GPL

Specifications

Passes APA AFG-01 and ASTM C-557 *Please note that the typical dry time for most construction adhesives is approximately 24 hours. This may vary due to temperature, humidity amount of product applied and surface porosity.
 

Get Adobe Reader to view certain LIQUID NAILS Adhesive product info

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

Directions

Surfaces must be clean, dry and structurally sound. Paneling must be conditioned per Manufacturer’s instructions. Research all installation instructions and read label for safety, health, and environmental information. Place in caulk gun, cut nozzle, and puncture inner seal with nail or wire. Cabinets and Countertops: Apply ¼” bead to contact areas. Press into place. Mechanical fasteners must also be used for wall cabinets. Furring Strips or Studs: Apply ¼” zigzag bead to each strip or stud. Press into place. Use nails at top and bottom. Drywall: Apply ¼” zigzag bead to each stud. Press drywall into place. Position panels so that edges meet at stud center. Nail as required. Subfloors: Apply ¼” bead to joists. Press subflooring into place and nail or screw every six inches around panel perimeter and every 12” into joists in field of the panel.

 

Visit these online retailers for a selection of LIQUID NAILS construction adhesive products.

Price and item availability may vary.

 
 
;