Tub & Tile Acrylic Latex Caulk (TC-10)

Specially formulated for bathroom caulking, this siliconized acrylic caulk provides a water- and mildew-resistant seal. TC-10 is unaffected by temperature extremes. Flexible and durable with excellent adhesion, this caulk is strong enough to reset tiles and easy to apply and cleanup. It remains bright white when dry, giving bathroom caulking jobs a lasting clean look.

 

LIQUID NAILS bathroom caulking product

Key Features

Recommended For:

bathroom caulking jobs like sealing around bathtubs, tub surrounds, showers, sinks, vanities, countertops, backsplashes and plumbing fixtures.

NOT Recommended For:

applications below the waterline, aquariums and over silicone sealants or wet or green wood (excessive joint movement might be experienced as wet or green wood dries).

Available Sizes

  • 10.1 fl. oz. cartridge
  • 6 fl. oz. squeeze tube

Coverage

  • 10.1 fl. oz. cartridge covers 30 lineal ft.
  • Using a 1/4" (.64 cm) bead: 6 fl. oz. squeeze tube covers 17 lineal ft.

Max VOC

28 GPL

 

Get Adobe Reader to view certain LIQUID NAILS Adhesive product info

You need Adobe Reader to view PDF files.
You can download it here for free if you don't have it.

Surface Preparation

Clean all surfaces thoroughly before applying this caulk. Use rubbing alcohol to remove soap film. Remove any old caulk or paint. Allow to dry completely before caulking with TC-10. Mask off joint to be sealed for neater bead, especially for bathroom caulking jobs like setting tile. Fill deep joints with solid filler to within 1/2" of surface.

Cartridge Application

Load TC-10 cartridge into standard caulking gun. Cut nozzle at 45° angle for desired bead size (marked on nozzle). Apply continuous bead of TC-10 into gap, using uniform pressure to fill completely. Smooth over with wet finger or tool. Caulk skins over within 10 minutes and should be level with surface. Let dry for 24 hours before exposing to water (especially important for bathroom caulking jobs). Drying time may be extended under humid conditions.

Painting Guidelines

Paintable with oil or latex paint. For best results, wait 24 hours, longer under humid conditions.

Squeeze Tube Application

Knead tube to soften contents. Cut tip at 45° angle where marked for desired bead size. Apply continuous bead of TC-10 into gap, using uniform pressure to fill completely. Smooth over with wet finger or tool. Caulk skins over within 10 minutes and should be level with surface. Let dry for 24 hours before exposing to water (especially important for bathroom caulking jobs). Drying time may be extended under humid conditions.

Drying Time

Skins over within 10 minutes. Dries in 24 hours.

Cleanup

Use water to clean up while wet. For dry caulk, scrape away.

Visit these online retailers for a selection of LIQUID NAILS construction adhesive products.

Price and item availability may vary.

 
 
 
;